Condition: perfect, after full retrofit !!!
|Energy of blow||25000 kgs|
|Distance between slides||1070 mm|
|Ram width||1050 mm|
|Ram length||1500 mm|
|Air Consumption Per Full Blow||4.5 Cubic Mtr|
|Compressor Size Cold Air||32.5 Cubic Mtr|
|Compressor Size Heated Air 220ºC||20.0 Cubic Mtr|
|Volume of Air Receiver||25.5 Cubic Mtr|
BÊCHÉ counterblow hammers are predominantly used for manufacturing large and ultra-large forgings. The high impact energy and tonnage of the hammer dies, moving in opposite directions, permits precision forming of large forgings. Counterblow hammers with hydraulic drives are particularly well suited to the medium tonnage range.
Counterblow hammer Beche DGH 25 — in a counterblow machine both the hammer and anvil move and the workpiece is held between them. Here excess energy becomes recoil. This allows the machine to work horizontally and have a smaller base. Other advantages include less noise, heat and vibration.